复杂形态钢结构设计培训班

首页 朱明之关于建筑-公众号 冷弯薄壁型钢体系《原汁原味美式施工》(六)

冷弯薄壁型钢体系《原汁原味美式施工》(六)


本来是个王者

应用场景错了

就成了青铜

大板体系的命门是所有墙体都是承重墙

不能拆

不能改

看图

不说话

The Infinity Structural System

Infinity Structures is a structural framing system supplier specializing in the Epicore MSR Composite Floor System on pre-panelized load-bearing metal stud walls.

We can generally do 9 or 10 stories of Infinity System, which could start on the slab-on-grade or an elevated concrete Transfer Slab. Our height limitation is based on how many stories of Infinity System we have, so you could have 10 stories of Infinity System sitting on a 5th Floor Transfer Slab which would actually be a 15 Story building!

We developed The Infinity Structural System in 1986, and a review of our Installation Lists (available upon request) proves that we have by far the most extensive experience and expertise of anyone in the business. For over 30 years and hundreds of projects, we have “fine tuned” the Infinity System making constant improvements for a more economical, faster, trouble-free and user-friendly system. Our scope of work typically provides the complete structural framing package ready for your local concrete sub to place the wire mesh, rebar, and concrete. Infinity Structures provides Project Management and Engineering assistance, and has several highly trained and experienced erection crews. Depending upon the Client’s desired approach, our Engineering Involvement varies from providing Light Gage Engineering Design/calculations/shop drawings to full EOR Structural Engineering design from the foundations through the roof.

The Infinity Structural System consists of the Epicore MSR Composite Floor System on pre-panelized load-bearing metal stud walls. Epicore MSR is a 2” deep high performance long-span composite metal deck that acts as a permanent form as well as the positive reinforcing in the slab. The dovetail rib with embossed locking lugs, flat bottom profile, and closed flutes make it uniquely suited for load-bearing metal studs since it inherently distributes loads evenly over the metal studs (eliminating the need for expensive load-distribution members or attempting to align joists and studs). The Epicore MSR Floor System can clear span up to almost 30 feet. The field poured slab is between a 4” and 8” slab thickness utilizing 4,000 psi regular weight concrete (3,000 psi or lightweight may be used if desired).

The load-bearing metal stud wall panels are typically 6” galvanized studs spaced at 16” on center (other stud sizes & spacing are available if desired). The gage of the studs will be 18, 16, 14, or 12 Gage depending upon axial loads, wind loads and stud height. The metal studs are custom ordered for your particular project, therefore the metal studs may be cut to any length to achieve your desired floor-to-floor heights (i.e. there are no standard stud height constraints). Infinity’s wall panels are fabricated off-site in a controlled environment using welded connections under very stringent QC requirements to ensure the highest quality available.

The lateral loads (wind and seismic) may be handled utilizing our exclusive Infinity Shear Panel (ISP), or traditional methods such as concrete shear walls, reinforced CMU/masonry shear walls, structural steel braced frames, or a combination.


本文来自网络,不代表钢构人的立场,转载请注明出处。搜索工程类文章,就用钢构人网站。 https://www.ganggouren.com/2019/06/e5d39fd4c1/

钢结构地图

上一篇
下一篇

作者: ganggouren

为您推荐

发表回复

您的电子邮箱地址不会被公开。 必填项已用 * 标注

联系我们

联系我们

17717621528

在线咨询: QQ交谈

邮箱: 1356745727@qq.com

工作时间:周一至周五,9:00-17:30,节假日休息
关注微信
微信扫一扫关注我们

微信扫一扫关注我们

关注微博
返回顶部